AS5812X#show int transceiver ethernet 1/1
Information of Eth 1/1
 Connector Type        : LC
 Fiber Type            : Multimode 50um (M5)
 Eth Compliance Codes  : 10GBASE-SR
 Baud Rate             : 10300 MBd
 Vendor OUI            : 00-01-9C
 Vendor Name           : OEM
 Vendor PN             : SFP+Cuc-C
 Vendor Rev            : 2
 Vendor SN             : 1912200001
 Date Code             : 19-12-24
 Tx-disable Capability : Yes
 DDM Information
   Temperature         : 28.75 degree C
   Vcc                 : 3.33 V
   Bias Current        : 6.00 mA
   TX Power            : -3.01 dBm
   RX Power            : -3.98 dBm
 DDM Thresholds
                            Low Alarm   Low Warning  High Warning    High Alarm
   -----------           ------------  ------------  ------------  ------------
   Temperature(Celsius)        -10.00         -5.00         75.00         80.00
   Voltage(Volts)                3.00          3.10          3.50          3.60
   Current(mA)                   1.00          2.00         13.00         15.00
   TxPower(dBm)                 -8.00         -7.50          2.00          3.00
   RxPower(dBm)                -17.01        -16.52          0.00          0.50
root@as7712:~# ethtool -m swp1
        Identifier                                : 0x03 (SFP)
        Extended identifier                       : 0x04 (GBIC/SFP defined b             wire interface ID)
        Connector                                 : 0x07 (LC)
        Transceiver codes                         : 0x10 0x00 0x00 0x00 0x20             0 0x04 0x80 0x00
        Transceiver type                          : 10G Ethernet: 10G Base-S
        Transceiver type                          : FC: intermediate distanc             )
        Transceiver type                          : FC: Shortwave laser w/o              (SN)
        Transceiver type                          : FC: Multimode, 50um (M5)
        Transceiver type                          : FC: 1200 MBytes/sec
        Encoding                                  : 0x06 (64B/66B)
        BR, Nominal                               : 10300MBd
        Rate identifier                           : 0x00 (unspecified)
        Length (SMF,km)                           : 0km
        Length (SMF)                              : 0m
        Length (50um)                             : 80m
        Length (62.5um)                           : 30m
        Length (Copper)                           : 0m
        Length (OM3)                              : 300m
        Laser wavelength                          : 850nm
        Vendor name                               : OEM
        Vendor OUI                                : 00:01:9c
        Vendor PN                                 : SFP+Cuc-C
        Vendor rev                                : 2
        Option values                             : 0x00 0x1a
        Option                                    : RX_LOS implemented
        Option                                    : TX_FAULT implemented
        Option                                    : TX_DISABLE implemented
        BR margin, max                            : 0%
        BR margin, min                            : 0%
        Vendor SN                                 : 1912200002
        Date code                                 : 191224
        Optical diagnostics support               : Yes
        Laser bias current                        : 131.070 mA
        Laser output power                        : 6.5535 mW / 8.16 dBm
        Receiver signal average optical power     : 6.5535 mW / 8.16 dBm
        Module temperature                        : -0.00 degrees C / 31.99              ees F
        Module voltage                            : 6.5535 V
        Alarm/warning flags implemented           : Yes
        Laser bias current high alarm             : On
        Laser bias current low alarm              : On
        Laser bias current high warning           : On
        Laser bias current low warning            : On
        Laser output power high alarm             : On
        Laser output power low alarm              : On
        Laser output power high warning           : On
        Laser output power low warning            : On
        Module temperature high alarm             : On
        Module temperature low alarm              : On
        Module temperature high warning           : On
        Module temperature low warning            : On
        Module voltage high alarm                 : On
        Module voltage low alarm                  : On
        Module voltage high warning               : On
        Module voltage low warning                : On
        Laser rx power high alarm                 : On
        Laser rx power low alarm                  : On
        Laser rx power high warning               : On
        Laser rx power low warning                : On
        Laser bias current high alarm threshold   : 131.070 mA
        Laser bias current low alarm threshold    : 131.070 mA
        Laser bias current high warning threshold : 131.070 mA
        Laser bias current low warning threshold  : 131.070 mA
        Laser output power high alarm threshold   : 6.5535 mW / 8.16 dBm
        Laser output power low alarm threshold    : 6.5535 mW / 8.16 dBm
        Laser output power high warning threshold : 6.5535 mW / 8.16 dBm
        Laser output power low warning threshold  : 6.5535 mW / 8.16 dBm
        Module temperature high alarm threshold   : -0.00 degrees C / 31.99              ees F
        Module temperature low alarm threshold    : -0.00 degrees C / 31.99              ees F
        Module temperature high warning threshold : -0.00 degrees C / 31.99              ees F
        Module temperature low warning threshold  : -0.00 degrees C / 31.99              ees F
        Module voltage high alarm threshold       : 6.5535 V
        Module voltage low alarm threshold        : 6.5535 V
        Module voltage high warning threshold     : 6.5535 V
        Module voltage low warning threshold      : 6.5535 V
        Laser rx power high alarm threshold       : 6.5535 mW / 8.16 dBm
        Laser rx power low alarm threshold        : 6.5535 mW / 8.16 dBm
        Laser rx power high warning threshold     : 6.5535 mW / 8.16 dBm
        Laser rx power low warning threshold      : 6.5535 mW / 8.16 dBm